K9 German Shepherd patch

This is a 3”x3” circle German Shepherd with shades embroidered patch. Patch made on my embroidery machine.  Select Military green, white or light grey background.
Border is embroidered with professional industrial Merrow machine.  

SELECT:
iron on
sew on
Or Attach and peel selection. This patch comes ready to attach to dogs vest. If your dogs vest comes with the “soft backing” if not soft back side of the patch is included in your order anyways “if” you select the attach and peel design. 

Iron on patches  can be placed on T-shirts, hoodies, jackets. Etc.  You need your Iron on high heat to apply.  Make sure the fabric you are applying it to can handle the heat. 

Tip: 1-Do not set your washer to hot water wash when washing any clothing with an “ironed on” patch. 
2- if your patch detaches on an area after a wash you did not press enough heat.  Set the iron back on the patch and iron back down again. 

PLEASE READ⬇️
INSTRUCTIONS
Step 1: HEAT IRON to High heat (cotton)  (make sure your fabric can handle this heat )
Step 2: PLACE PATCH in the desired position & place a cloth (cotton preferred ) on top of patch to protect patch and your clothing. 
Step 3: PRESS the iron down for 30-60 seconds. Add pressure  (use flat surface) depending on the fabric. Press down on all the edge and all of center make sure you heat all of the patch.  Keep iron on patch the whole time make sure heat transfers to melt the glue on to the fabric. 
IF YOU WASH YOUR SHIRT AND PATCH CAME OFF THE SHIRT A LITTLE THEN REPEAT PROCESS..you did not apply enough heat.  
Remember you need to hold down iron to make sure you transfer heat right thru it to melt the glue behind it. 🐾

Optional : 
Step 4: Sew with machine, or by hand with fine needle & thimble.
FOR BACKPACKS HATS & HEAVY FABRICS: Iron on may not work with heavy materials. MACHINE SEW, OR HOT GLUE PATCH ON.